Laptop Cooling Pad with their hands Insufficient cooling - a problem faced by many owners of notebooks.What is Laptop Cooling Pad and how you can make it yourself?This will tell the Soviet Union.

limited internal space of the laptop, the inability to install additional cooling fan in your notebook - all this led to a special cooling pads for laptops.Laptop Cooling Pad improves cooling.Compared to stationary PCs, laptops are more at risk of overheating and that is why efficient cooling laptop so important.

Laptop Cooling Pad is a construction materials well diverting heat, in which there are one or more fans.Modern cooling stand allows you to change the angle, to prevent accidental slippage laptop, contribute to a more convenient use of the laptop.Powered Laptop Cooling Pad gets, usually through a USB-interface.

Laptop Cooling Pad is quite common and they can be purchased in almost any computer shop. When selecting cooling pad should pay attention to several basic parameters: the number and capacity of fans, stand material, the siz

e of the stand.

The Laptop Cooling Pad is typically used from 1 to 4 fans. should not join as many fans, because the more fans there on the stand, the more noise they emitted.If only one pedestal fan, it must have sufficient capacity.If you stand a few fans, it is desirable to be located closest to the most heavily heated areas of the notebook.

Laptop Cooling Pad is made of aluminum and plastic. weight aluminum stand can reach 1 kg and above.Stand plastic weighs less.Dimensions coasters are selected according to the size of the laptop as universal models exist which are regulated by size.

When choosing a cooling pad should pay attention to the location of the holes through which the air access to the notebook. best option - the location of the holes on the stand as close as possible to the location of the air intakes at the bottom of the notebook.

If the acquisition of cooling pad is impossible for some reason, can try to make a stand with his hands .Notebook Cooler with your own hands is fairly simple.

To produce cooling pad will need metal (aluminum sheets) or plastic (Plexiglas sheets). Fit laptop from sheets of metal or Plexiglas cut upper and lower stand cover , lateral sides, the rear cover.The top cover of the stand are planned and drilled holes through which will flow to the laptop air blower.

Locate holes by placing the laptop for a while on the stand cover. most heated areas marked - in these places it is advisable to drill a hole and put fans.Also drilled holes for mounting fan.The rear or side surfaces of the stand drilled holes for air intake.

Laptop Cooling Pad metal fastened with screws. stand made of Plexiglas can be assembled by gluing parts such composition : 3 g chips remaining after cutting Plexiglas, 100 g dizhloretana.Under continuous stirring, the resulting mixture is dissolved chips, after which the composition at two day should be left in a dark place.

Before connecting the bonding surfaces are cleaned, degreased.Bonding is made butt glue is applied with a brush on both abraded surface.

For fans access to one of the covers is to make a removable stand. Fans are located "in the blowing."To work received coasters need power supply, which are connected and fans.The required capacity of the fan depends on the number and capacity of the fans.

Laptop Cooling Pad with their hands